FY6600 series Dual-channel Function Signal generator combines multiple functions in one, such as Function Signal Generator, Arbitrary Waveform Generator, Pulse Generator, Analog/Digital Modulator, VCO, Sweep, Counter and Frequency Meter, etc. The instrument adopts the Direct Digital Synthesizer(DDS) technology and provides stable, precise, pure and low distortion signals. It's a great testing or measuring instrument for electronics engineers, electronic laboratory, teaching and researching.
Features:
Adopt the Direct Digital Synthesizer(DDS) technology and provide stable, precise, pure and low distortion signals.
2.4 inch TFT color LCD with 320*240 resolution, simultaneously display parameters and graphics of CH1 and CH2.
Use 14-bit high-speed D/A converter chip(5Vpp output quantization error is less than 1mV), 250MSa/s sampling rate and 14bits vertical resolution.
Can output up to 97 groups of functions/arbitrary waveform: 33 groups of preset waveform and 64 groups of user-defined waveform.
64 groups of arbitrary wave storage function, each one of waveform storage depth is 8192 points * 14bits.
Various modulation types: AM, FM, PM, ASK, FSK and PSK modulations.
Sweep Function: linear sweep and logarithmic sweep functions; 0.01s-999.99s sweep time; forward, backward and roundtrip sweep directions.
VCO Function(Voltage Control Output): voltage controlling frequency/amplitude/offset/duty cycle and PWM modulations.
Burst Output Function: there has manual trigger, internal CH2 trigger and external trigger for your options. It can output 1~1048575 pulse trains.
Frequency Meter Function: Max. frequency workable is 100MHz and Min. frequency workable is 0.01Hz.
Counter Function: 2 coupling measure modes including DC coupling and AC coupling.
Support two or more signal generators connected to achieve multi-channel output, the maximum support 16-channel synchronous output.
Completely independent dual channels output, synchronizing operation between channels.
Precisely adjust the phases of the two channels, Precision can be 0.01°.
High Amplitude Resolution: the minimum amplitude resolution can reach 1mV, amplitude range is 0Vpp~20Vpp.
Duty-cycle of each channel can be adjusted independently(0.01%-99.99%), the adjusting resolution is 0.01%.
-10V~+10V DC offset range, offset resolution is 0.001V.
Storage Function: can save 20 groups of parameters set by the user and extract at any time.
Communication Function: all functions can be controlled by PC program and the communication protocol is open for secondary development.
Output Short-circuit Protection: all channels can work more than 60 seconds when the load is short-circuited.
Arbitrary Waveform Editing Function: user can edit arbitrary wave on PC and then download to output from the instrument.
Specifications:
Frequency Parameters | |||
Sine Wave Range(Optional) | 0Hz~30MHz / 0Hz~50MHz / 0Hz~60MHz | ||
Square Wave | 0Hz~25MHz | ||
Triangle Wave | 0Hz~10MHz | ||
Ramp | |||
Pulse Wave | |||
Arbitrary Waveform | |||
TTL/COMS | 0Hz~20MHz | ||
Min. Pulse Width | 20ns(Pulse wave minimum width of all models can reach 20ns) | ||
Min. Resolution | 1μHz | ||
Frequency Accuracy | +/-20ppm | ||
Frequency Stability | +/-1ppm/3 Hours | ||
Waveform Parameters | |||
Waveform Types | Sine, Square (Duty Cycle adjustable), Pulse (Pulse width and cycle time can be set accurately), Triangle/Ramp, Sawtooth Wave, CMOS, Four channels TTL, DC, Half wave, Full wave, Positive Step, Inverse Step, Positive Exponent, Inverse Exponent, Lorenz Pulse, Multitone, Noise, ECG, Trapezoidal Pulse, Sinc Pulse, Narrow Pulse, Gauss White Noise, AM, FM, and other 64 sets customer-defined waveform | ||
Waveform Length | 8192 points * 14bits | ||
Sampling Rate | 250MSa/s | ||
Vertical Resolution | 14 Bits | ||
Sine | Harmonic Suppression | ≥50dBc(<1MHz); ≥45dBc(1MHz~20MHz) | |
Total Harmonic Distortion | <0.5% (20Hz~20kHz,0dBm) | ||
Square | Rise/Fall Time | ≤7ns(VPP<5V) | |
Overshoot | ≤5% | ||
Duty Cycle | 0.01%~99.99% (Resolution 0.01%) | ||
Sawtooth Wave | Linearity | >99% (0.01Hz~10kHz) | |
Output Parameters | |||
Amplitude(VPP) | Frequency≤10MHz | 10MHz<Frequency≤20MHz | Frequency>20MHz |
1mVpp~20Vpp | 1mVpp~10Vpp | 1mVpp~5Vpp | |
Resolution | 1mV | ||
Amplitude Stability | +/-0.5%/5 Hours | ||
Amplitude Flatness | +/-2.5%(<10MHz); +/-5%(>10MHz) | ||
Waveform Output | |||
Impedance | 50Ω +/-10% (Typical) | ||
Protection | All channels can work within 60s under load short-circuit condition | ||
DC Offset | |||
Offset Range | Frequency≤20MHz: +/-10V; Frequency>20MHz: +/-2.5V | ||
Offset Resolution | 1mV | ||
Phase Parameters | |||
Phase Range | 0~359.99° | ||
Phase Resolution | 0.01° | ||
TTL Output | |||
TTL Level Amplitude | >3Vpp | ||
Fan-out | >8 TTL LOAD | ||
Rise/Fall Time | ≤10ns | ||
COMS Output | |||
Low Electric Level | <0.3V | ||
High Electric Level | 1V~10V | ||
Rise/Fall Time | ≤18ns | ||
Frequency Meter Function | |||
Measurement Objects | Frequency, Period, Positive/Negative Pulse Width, Duty Cycle | ||
Input Voltage Range | 2Vpp~20Vpp | ||
Frequency Meter | Range: 0.01Hz~100MHz; Resolution: 0.01Hz; Sensibility: Gate Time 3 Grades (1S, 10S, 100S) Adjustable | ||
Counter Function | |||
Counting Range | 0~4294967295 | ||
Coupling Mode | 2 kinds of Coupling Modes: DC and AC | ||
Counting Mode | Manual Operation | ||
Sweep Function | |||
Carrier Waveform | Sine, Square, Ramp, Arbitrary (except DC) | ||
Sweep Type | Linear Sweep or Logarithm Sweep | ||
Sweep Direction | Forward, Backward and Roundtrip | ||
Sweep Time | 0.01s-999.99s/Step | ||
Sweep Objects | Frequency, Amplitude, Offset, Duty Cycle | ||
Setting Range | Starting Position and Finishing Position can be set arbitrarily | ||
Sweep Range | Decided by Parameters Setting | ||
VCO Function(Voltage Control Output) | |||
Modulation Signal Range to Input | 0~5V | ||
VCO Signal Frequency Range | 0-1000Hz | ||
VCO Control Object | Voltage Controlling Frequency(VCF), Voltage Controlling Amplitude, Voltage Controlling Offset, Voltage Controlling Duty Cycle | ||
VCO Special Function | Can Amplitude Modulate(AM) or Frequency Modulate(FM) by external analog signal | ||
Modulation Function | |||
Modulation Type | AM, FM, PM, ASK, FSK, PSK | ||
Carrier Waveform | Sine, Square, Triangle, Ramp, Arbitrary waveform (except DC) | ||
AM | |||
Source | Internal (CH2) / External (VCO IN Port) | ||
Modulating Waveform | Sine, Square, Triangle, Ramp, Arbitrary Waveform | ||
Depth | 0% to 100% | ||
Modulating Frequency | Internal : 1μHz~1MHz; External: 1μHz~2KHz | ||
FM | |||
Source | Internal (CH2) / External (VCO IN Port) | ||
Modulating Waveform | Sine, Square, Triangle, Ramp, Arbitrary Waveform | ||
Modulating Frequency | Internal : 1μHz~1MHz; External: 1μHz~2KHz | ||
PM | |||
Source | Internal (CH2) / External (VCO IN Port) | ||
Modulating Waveform | Sine, Square, Triangle, Ramp, Arbitrary Waveform | ||
Phase Deviation | 0° to 360° | ||
Modulating Frequency | Internal : 1μHz~1MHz; External: 1μHz~2KHz | ||
ASK | |||
Source | Internal (CH2), External (ASK IN Port), Manual | ||
Modulating Waveform | Square with 50% Duty Cycle | ||
Key Frequency | 1μHz~10MHz | ||
FSK | |||
Source | Internal (CH2), External (FSK IN Port), Manual | ||
Modulating Waveform | Square with 50% Duty Cycle | ||
Key Frequency | 1μHz~10MHz | ||
PSK | |||
Source | Internal (CH2), External (PSK IN Port), Manual | ||
Modulating Waveform | Square with 50% Duty Cycle | ||
Key Frequency | 1μHz~10MHz | ||
Burst Function | |||
Carrier Waveform | Sine, Square, Ramp, Arbitrary (except DC) | ||
Burst Count | 1~1048575 | ||
Trigger Source | Manual, Internal, External (AC/DC) | ||
General Parameters | |||
Display Type | 2.4 inch TFT Color LCD | ||
Save & Load | Amount | 20 | |
Position | 01 to 20 (01 for start default value) | ||
Interface | Interface Type | USB Serial Interface | |
Communication Rate | 115200bps | ||
Communication Protocol | Command Line Mode, providing communication protocols | ||
Technic | SMD, LSI, Reliable and Durable | ||
Buzzer | Can be turned on/off by setting | ||
Power Supply | Plug Type(Optional) | US Plug / EU Plug / UK Plug / AU Plug | |
Power Voltage Range | AC100V~240V | ||
Environmental Conditions | Temperature: 0°C~40°C; Humidity: <80% | ||
Size | 19.5 * 17.5 * 7cm / 7.67 * 6.9 * 2.75in | ||
Weight | 614g / 21.68oz | ||
Package Size | 24 * 21 * 9.5cm / 9.45 * 8.3 * 3.74in | ||
Package Weight | 995-1058g / 35.08-37.73oz |
Package List:
1 * DDS Signal Generator
1 * CD
1 * Power Cable
1 * USB Data Cable
1 * BNC-BNC Cable
2 * BNC-Clip Cable